Monday, September 8, 2008

HefeWeizen


I decided to try my hand at a HefeWeizen last month. I was looking for an easy drinking beer that would be ready in less than 3 weeks. This seemed to fit the bill just fine.

In a bold move, I decided to craft my own recipe for this, despite having never brewed one before. I did some research and came up with a nice easy recipe. Don't be surprised if you have seen recipes very very similar to this around, this is a basic hefe and so it resembles a lot of other recipes.

The key ingredients to a HefeWeizen are: wheat malt, pilsner malt and yeast. That gives you the basic core of the beer. Hops are not a big priority here, just need a little for balance. I used German Magnums, and hopped it to 9.7 IBUs. Use a clean bittering hop for this, you don't want too much flavor coming through. I like Magnums because while they are very bitter, they are also extremely smooth.

For my HefeWeizen, I decided I wanted just a touch of something extra. So I added a small amount (1 lb) of Munich Malt. That adds just a touch of extra maltiness that goes very well with the style, in my opinion.

The yeast and fermentation temperatures make or break this beer. For the yeast I chose White Labs WLP380 HefeWeizen IV Ale. This is a more balanced yeast, giving a nice amount of both clove and banana flavors. It is supposed to be less fruity than other Hefe yeasts, but I found that it added a significant amount of banana aroma, especially while the beer was still young.

White labs lists the optimum temperatures for this yeast as 66°-70°, don't listen to them! If you ferment it that warm you will have a fruit basket on your hands. Make a nice starter for this (use www.mrmalty.com to calculate size) and pitch cold. Like 55-58° cold. Let the beer warm up naturally to 62° and hold it there. Give it lots of time, at this temp the Hefe IV is a bit slow, but worth the wait. In my case I let it go for 1 1/2 weeks and then I let it warm up to 67° to finish out.

The most important step here is controlling your temps, pitch cool, ferment cool and all will be well. If you ferment warmer it will still be drinkable, but in my opinion you won't strike that wonderful balance between flavors.

Here is the recipe:
for a 6 gallon batch at 70%
7 .00 lb White Wheat Malt
3.75 lb Pilsner Malt
1.00 lb Munich Malt
.30 oz Magnum (10.43%) @ 60
WLP380 HefeWeizen IV Ale

Mash at 152° for 75 minutes.

Use a 90 minute boil to drive off any DMS.

Should be ready to bottle keg in a couple of weeks. Enjoy this beer young!

Brown Porter

I brewed up what was supposed to be a brown porter. That was the idea. The recipe was one I found on the internet, it claimed to be a taddy porter clone, but that was a complete lie. It was in reality far more like Black Butte than Tadcaster.

For a 6 gallon batch at 70% efficiency:
10 lb Maris Otter
1.3 lb Crystal 60°L
1 lb Black Patent
.5 lb Chocolate Malt
.2 lb Dark Molasses
1.11 oz Northern Brewer @ 90
.6 oz Fuggles @ 15
WLP007, 2 liter starter

Est OG: 1.053

Mash at 150° for 75 minutes.

I ended up overshooting my OG by 5 points and started at 1.058

Ferment cool at 62-64°. I allowed it to raise to 67° after a week and a half to get full attenuation. WLP007 was very very quick for me. It dropped to 1.019 after just 3 days. After 2 weeks it was 1.017. Only 70% attenuation, but it worked nicely for the style.

I ended up with a dark beer with a very full body and lots of dark roasted grain character. Fantastic drinking. Even on a hot summer day, it's very refreshing. Serve it a little cold for the style and it really goes down smooth.

Wedding beers were a hit!

20 gallons of beer and I have about 3 gallons left. Not too bad. The California Common and the WitBier were the big hits, with the Pale in 3rd and the Stout a distant 4th. Well, I knew that Stout was not all it could be when I made it.

I'm still of the opinion that I left the best beers at home. I whipped up a Brown Porter and a HefeWeizen to have around for family and friends and both of them turned out amazing! Oh well.

Expect recipes and posts on both of those soon.

Wednesday, July 23, 2008

The Wedding Beers

Well, my wedding is coming up and I'm just about done brewing for it. I'm doing 4 batches total. I wanted to do some lagers, but ran out of time. In the end I decided on the following:
  • APA - Good old American Pale Ale, basic, tasty, classic.
  • Stout - Formerly an Oatmeal Stout, now Just a Stout.
  • California Common - No, not this one. I rebrewed it a few days later, and hopefully made something that doesn't resemble gasoline.
  • Witbier - Brewing this on the weekend. Light wheat ale with a hint of citrus. Ferments fast and best drank young. Perfect for the time starved brewer.

My brewing disasters continued...

I took a long hiatus from brewing this winter. Life just got too busy and it was too damn cold outside. Once I stopped brewing regularly, it was hard to find the motivation to start brewing again.

Finally last month I got a batch going. Went for an Irish Red. It's a recipe that I have made many times in the past, so I just followed my recipe and managed to miss my OG by more than 10 points. Turns out somebody had been fiddling with my mill and the grain was barely crushed. And I didn't notice until I started the mash. Oops. Oh well, I went ahead and let it finish. It was actually quite tasty, if a little thin.

Next up I brewed a California Common, or that was the plan at least. When making my starter I ran out of malt extract and in a fit of desperation added in some corn sugar (this is bad idea #1). I then proceeded to brew the beer based on the recipe without double checking it (bad idea #2). Turns out it was an old recipe from before I had figured out my water volumes for All Grain. I ended up with more than 6 gallons at the end of the boil. Instead of boiling more, I decided to just go ahead and cool and rack it (bad idea #3). Now remember that starter (see bad idea #1)? Well, it was taking it's sweet time to get going so after a couple of days I just decided to dump the whole thing in, I usually decant and just pour the slurry in (bad idea #4).

That's the end of the truly bad ideas, it fermented like crazy, tons of blow-off, so I thought maybe it would be all OK. Maybe not the best I had ever made, but drinkable right? Wrong! After it fermented out, I kegged it up and since I had a free tap on my kegerator I hooked it up. I drew a pint of it yesterday, thinking it might be a bit green but would give me a good idea of what it will turn into.

I actually spat it out. I couldn't even swallow it. It tasted like rocket fuel, it was horrid. I'm guessing it was probably flavors I introduced from bad idea #1 and bad idea #4 (and maybe a sprinkle of #2 and #3). I might let it age a bit and see what happens, but I'm prepared to dump it as soon as I need that keg free for something that more closely resembles beer.

Tuesday, July 22, 2008

Just a Stout...I guess

I really have to start paying more attention when I brew. Maybe I'll have to create a checklist of tasks for the brew day.

This past Sunday I brewed an Oatmeal Stout, I intended to at least. Had issues with the crush, the mill and everything else, but I got it done and into the fermenter. I was a few points shy on my OG, but figured it was close enough. That is until I started to clean up the kitchen and noticed the paper bag full of my lovingly toasted, flaked oats still sitting on the counter.

Oops.

I guess it's just a stout now.

Tuesday, October 30, 2007

Ordinary Bitter

Last Saturday was brew day for me. I finally got around to a style I've been meaning to brew since August, the Ordinary Bitter.

Here is what the bjcp has to say about the ordinary bitter:

Medium to high bitterness. Most have moderately low to moderately high
fruity esters. Moderate to low hop flavor (earthy, resiny, and/or floral UK
varieties typically, although US varieties may be used). Low to medium maltiness
with a dry finish. Caramel flavors are common but not required. Balance is often
decidedly bitter, although the bitterness should not completely overpower the
malt flavor, esters and hop flavor. Generally no diacetyl, although very low
levels are allowed.


I went with a pretty basic recipe for this. Nothing fancy, for a 6 gallon batch at 70%:
  • 7.00 lb Maris Otter
  • 1.30 lb Crystal 15L
  • 1.00 lb Victory Malt
  • .85 oz Northern Brewer [8.50%] (90 min)
  • .75 oz East Kent Goldings [4.00%] (30 min)
  • .60 oz East Kent Goldings [4.00%] (0 min)
  • 1 whirlfloc (10 min)
  • 2 liter starter of WLP005 British Ale
Estimated OG: 1.040
IBUs: 31.6
Color: 7.7 SRM
BU:GU ratio: 0.787

I mashed at 154° for 60 mins and boiled for 90 mins.

The 2 liter starter was probably overkill for a beer this small, but I bought the yeast back in July so I wanted to make sure I had a good supply of viable yeast.

I'm sure I did now, because I went from 1.039 to 1.011 in 48 hours. I checked on it Monday night and was surprised that the Krausen had fallen already and the yeast had dropped out. I thiefed a sample and got the 1.011 reading. Not bad!

I'm going to leave it a couple of days more, then rack to a keg with a half ounce of east kent goldings to give it a little more aroma.

Should be ready to drink next week!

Saturday, October 20, 2007

California Common

I brewed up a california common back in August. A california common is the proper name for what is also known as steam beer.

Steam beer was a beer originally produced in California around the turn of the century. German immigrants to the bay area setup breweries to supply beer to all the local workers. Germans have a long lagering tradition and would naturally try to apply their lager knowledge to the new beer they were producing on the west coast.

Unfortunately, there were no cool, damp caves as in Germany, nor was there any readily available source of ice to keep the beer cold. So, they did the best they could and produced lager beer at moderate temperatures (60-65°) instead of the cooler temperatures a lager would normally require (40-50°).

The result was steam beer, now known as the California Common.

My California Common turned out well. It took a long time to fully ferment, nearly a month in the primary. It has now been in a keg at cold temps for another month and is quite tasty. It has a nice creamy character and clean finish. The Northern Brewer hops that are the trademark of this style give this beer a slightly odd 'spicy' taste. So it's initially a surprising taste, but it grows on you.



Monday, October 1, 2007

Schwarzbier

Yesterday was not the best brew day I ever had. I was creating a schwarzbier and was pretty excited about it. I started to mill my grains but my Barley Crusher kept binding up. The roller that spins free was completely stuck. I had to take the whole thing apart, clean it and put it back together. That got me through about 5 more pounds before I had to break it down again.

Well, I got through that, got all my grains crushed and was ready to dough in. I added the grains to the water and was thinking to myself that it looked awfully runny. But I figured Beersmith has always figured mash volumes correctly, so I went with it. After starting the mash I went to double check the volumes and realized that Beersmith had indeed calculated them correctly, but I was reading them off the wrong recipe. D'oh!

I decided to just continue on. I figured there was nothing to be done now. I headed out to grab some breakfast while the grains were mashing and realized my car had been broken into. Fantastic! It took me a good hour or more to get that dealt with (calling police, cancelling a credit card that was stolen, etc) and by the time I got back to the beer, it had been mashing for 2 hours. Oops.

Oh well, I drained the mash tun, sparged and soldiered on. Started the boil, turned my back for a second and had my first ever boil over. yay!

I finally got it finished and into the carboy. Ended up overshooting my target OG by 6 points. 1.059 instead of 1.053. Guess that one will be a little stronger than intended.

Still it had a beautiful color and smelled fantastic. I fed it a healthy slurry of German Bock yeast and hopefully will soon have 5 gallons of delicious beer!
Posted by Picasa

I hope you like fruit!

I brewed what should have been a very nice Irish Red a while back. The grain bill looks good, the hopping seemed right, but the one unknown was the yeast. White Labs WLP004 Irish Ale yeast. It's an Irish beer, so Irish Ale yeast should be just the ticket, right? Wrong! This yeast produced a host of fruity flavors in the beer. It completely upsets the balance and makes the beer hard to drink.

I'm disappointed, but I'm not going to give up so easily. I'm going to brew the same recipe again, but substitute either a clean Ale yeast or a clean lager yeast. There is a good beer hiding in this recipe. I'll find it yet.

Friday, September 7, 2007

Mike's Milkshake

My next project is to make a creamy smooth porter. At least that was the plan when I started the recipe. In the end, it should be porter-like, but I've decided to make it a lager. I'll use a german lager yeast to hopefully high-light the malts and keep it easy-drinking.

Here it is - Mike's Milkshake Porter

Real Men Drink Blueberry Beer

I brewed a Wheat Beer last month. The recipe calls for an ounce of blueberry extract to be added. I was a little gun-shy about adding blueberry to my nice beer so I went ahead and kegged it without the extract. It tasted fine without it, a little bland perhaps but OK.

Well, I got curious and decided to add a couple drops of the blueberry extract to a glass and pour the beer on top of it. Much to my surprise it tasted great. Gave it a nice tang that blended with the coriander nicely.

So, now that I'm a true believer in the blueberry I bled the pressure out of the keg and added two capfuls of the extract. I probably could have done more, but decided to err on the side of caution.

Monday, August 27, 2007

Jamil's California Common

Here is the California Common that I brewed yesterday:

Steamed Ant
Brew Type: All Grain
Style: California Common
Brewer: Joshua
Batch Size: 6.00 gal
Boil Volume: 7.35 gal
Boil Time: 60 min
Brewhouse Efficiency: 70.00 %


Ingredients
9.00 lb Pale Malt (2 Row) US (2.0 SRM)
2.00 lb Munich Malt (8.0 SRM)
1.00 lb Caramel/Crystal Malt - 40L (40.0 SRM)
0.50 lb Victory Malt (25.0 SRM)
0.13 lb Chocolate Malt - Light (200.0 SRM)
1.14 oz Northern Brewer [7.30 %] (60 min) Hops 25.3 IBU
0.94 oz Northern Brewer [7.30 %] (15 min) Hops 10.4 IBU
1.00 oz Northern Brewer [7.30 %] (0 min) Hops -
1 Pkgs San Francisco Lager (White Labs #WLP810) Yeast-Lager

Beer Profile
Estimated Original Gravity: 1.053 SG (1.048-1.054 SG)
Measured Original Gravity: 1.052 SG
Estimated Final Gravity: 1.017 SG (1.011-1.014 SG)
Estimated Color: 11.1 SRM (10.0-14.0 SRM)
Bitterness: 35.7 IBU (30.0-45.0 IBU)
Estimated Alcohol by Volume: 4.77 % (4.50-5.50 %)
Mash Profile Name: Batch Sparge
Mash Tun Weight: 9.00 lb
Mash Grain Weight: 12.63 lb
Mash PH: 5.4 PH
Grain Temperature: 72.0 F
Sparge Temperature: 168.0 F
Sparge Water: 5.42 gal
Adjust Temp for Equipment: TRUE
Mash Temp: 154°F

Damn you Beersmith!

Brewed a California Common yesterday, as per usual I just followed the mash steps from Beersmith. This has always worked out well for me after some initial setup to get my equipment volumes and boil-off right.

Well, it seems I found a quirk in Beersmith. I was doing so many 90 many boils that I set my equipment to 90 minute boils (and forgot I had done so). Well, as it turns out, if your equipment is set to 90 minutes, the recipe will give you the water quantity for 90 minutes even if the recipe is set to 60. So I overshot my volume, by a lot. Oops.

On the plus side, I had tightened down my crush for this batch and still got 1.052 when I was expecting 1.053 for a smaller volume. So things should still turn out OK.

Tuesday, August 21, 2007

I love that beer is so forgiving

So a few posts ago, I mentioned how I had screwed up my Irish Stout recipe. I ended up brewing the beer short a half pound of Flaked Barley. The great thing about beer is that if you throw malted grain, water, hops and yeast together you are pretty much always going to get beer. The ingredients want to become beer.

Well, I kegged my stout last week and let it carbonate for 6 or 7 days. And now, it's pretty damn good, if I do say so myself. It's not perfect, it could use some more body but it has a nice smooth flavor. I think I did a good job of balancing the hops against the roast barley, so it doesn't have a harsh flavor to it.

It's major failing, really, is intentional. It is a one note beer. It has a roasted flavor, that's it. No complex flavor profile here, it's just nice and roasty. No hop aroma, no malty flavor, no fruity esters. The idea behind this beer was to get a nice basic stout that I can then start playing with. I will probably brew this multiple times in the future, adding different grains, hops, yeast and seeing what the result is.

It's lagering time!

After months of brewing ales, it's time to tackle lagers. For those unsure of the difference, Ales and lagers are differentiated by the yeast used. Ale yeast is a top fermenting yeast that works at room temperature (60-70°). Ales tend to have more esters that cause for fruit and spicy tastes. Lager yeasts are bottom fermenting and are usually fermented at lower temperatures (40-50°). They are then stored (lagered) for long periods at cold temperatures. Lagers have cleaner flavor profiles and highlight the malt and hops more than the yeast.

I'm trying a lager because I want to have beer around that is more newbie friendly. So I'm doing an American Pilsner, loosely based on Sierra Nevada's Summerfest. This is not really clone, more just in the same style. It uses the same malts and hops, so should be in the ballpark.

Here is the recipe I will be using:
Slice of Summer
Classic American Pilsner

Type:All Grain
Batch Size: 6.00 gal
Boil Time: 60 min
Brewhouse Efficiency: 70%

Ingredients
10.80 lb Pale Malt (Domestic 2 Row)
0.60 lb Munich Malt
0.60 oz Saaz [4.00%] (60 min)
0.60 oz Pearle [8.00%] (60 min)
1.20 oz Saaz[4.00%] (15 min)
1.20 oz Saaz[4.00%] (1 min)
1 Whirlfloc Tablet
1 Package German Lager Yeast

I'll be brewing this in about 2 weeks, should be just about the right time for my batch of Irish Red to begin cold conditioning. Since I store all my fermenting beer in the same chest freezer, there are some logistical issues with brewing both ales and lagers at the same time, but I'm sure I can work those out.

Monday, August 20, 2007

Shades of Red

This past sunday, I tried my hand at an Irish Red Ale. This is the first of many potential "Wedding Beers" that I will be brewing. Basically, I will be brewing beer for my wedding next year and am spending the time until then brewing various recipes and evaluating the results. So in a nutshell, I have to brew a lot of beer and then drink a lot of beer. How horrible!

Shades of Red
Brew Type: All Grain
Date: 8/19/2007
Style: Irish Red Ale
Brewer: Joshua
Batch Size: 6.00 gal
Boil Volume: 8.06 gal
Boil Time: 90 min
Brewhouse Efficiency: 70.00 %

Ingredients
10.23 lb Pale Malt, Maris Otter (3.0 SRM)
0.58 lb Caramel/Crystal Malt - 60L (60.0 SRM)
0.58 lb Carared (Weyermann) (24.0 SRM)
0.15 lb Roasted Barley (300.0 SRM)
1.50 oz Fuggles [4.00 %] (90 min)

0.60 oz Goldings, East Kent [4.00 %] (30 min)
0.60 oz Goldings, East Kent [4.00 %] (15 min)
1.00 Whirlfloc Tablet (Boil 15.0 min)
1 Pkgs Irish Ale (White Labs #WLP004)

Beer Profile
Estimated Original Gravity: 1.050 SG (1.044-1.060 SG)
Measured Original Gravity: 1.050 SG
Estimated Final Gravity: 1.014 SG (1.010-1.014 SG)
Estimated Color: 11.9 SRM (9.0-18.0 SRM)
Bitterness: 26.0 IBU (17.0-28.0 IBU)
Estimated Alcohol by Volume: 4.77 % (4.00-6.00 %)

Mash Profile
Name: Batch Sparge

Mash Tun Weight: 9.00 lb
Mash Grain Weight: 11.54 lb
Mash PH: 5.4 PH
Grain Temperature: 72.0 F
Sparge Temperature: 168.0 F
Sparge Water: 6.5 gal
Adjust Temp for Equipment: TRUE


Original Recipe created by Fred Dujour.

Hopefully this beer turns out to be a malty, easy drinking beer. I'm hoping for something that is palatable to people who aren't used to drinking much beer outside of Bud/Miller/Coors (BMC). For people who already eschew the macro-breweries I will hopefully have more bold styles on display.

On to the brew notes! This is my 5th All Grain beer and things are finally working pretty smoothly. I heated 14.5 qts of water to 166° and put that in my Coleman extreme cooler. I doughed in and gave it all a good stir, I was aiming for 152° and hit it pretty close. After stirring a lot to eliminate hotspots, I was reading between 151.8° and 152.5°. Close enough for me. I did a longer mash at 75 minutes (mostly because I got distracted and forgot), then collected my first runnings. I sparged with 6.5 gallons of 168° and got to my pre-boil volume of 8.10 gallons (or there abouts, I don't measure that exact).

This is where I first started to feel good about the brew, I was looking for a pre-boil gravity of 1.038 and sure enough, I was right on target.

I boiled for 90 minutes then started cooling. I cooled as low as I could with my water (~75°), then aerated and put it into the chest freezer overnight. This morning it was quite cool at 52°, I pitched my yeast and will let it warm up to 62° or so. I'm aiming low because I don't want many esters in this beer. I want the malt flavor to be dominant.

I deviated a bit from the original recipe. The original recipe called for a decoction mash, I'm far too lazy for that. I switched that up to a simple infusion mash.

Hopefully, it still turns out well.

Friday, August 17, 2007

I'm an idiot

So a few weeks ago I brewed an Irish Stout from a recipe that I put together. I posted it on this blog actually. Well, that recipe was wrong. I got the Roasted Barley and the Flaked Barley mixed up. And then I went and ordered my ingredients for the wrong recipe. The real recipe calls for 2.5 pounds of Flaked Barley and 1.3 pounds of Roasted Barley. What did I order? 3 pounds of Roasted Barley and 2 pounds of Flaked Barley.

Worse yet, I didn't notice until I went to brew it. So we ended up with half a pound less Flaked Barley than I intended. It's not the end of the world, it will still be beer, but it will have less body than I wanted.

Someday I'll brew the recipe correctly.

Not so Amber Ale...

A few months back I brewed the all grain version of Northern Brewer's Amber Ale. The beer I ended up with was nothing like an Amber ale. It's pale yellow with a slight malty taste and little to no hop aroma. Disappointing at best. I originally thought I had just screwed up in the brewing process, but let's take a closer look at the recipe:

  • 9# Rahr 2-Row Pale
  • 1# Caravienne
  • 1 oz Northern Brewer (60 minutes)
  • 1 oz Hallertauer (1 min)
  • Wyeast 1056

Mashed at 153° for 60 minutes, skipped the mash out step, I let it ferment for 3 weeks, then kegged and pressurized at 12 psi.

I'm not sure what they were thinking but there is no way that 9 pounds of 2-row and a 1 pound of caravienne were going to make an amber colored beer. Beersmith estimates a color of 6.2 SRM, a golden yellow. I have to agree that Beersmith is right on with that. The beer I have is almost straw colored, it looks almost like a pilsner at first glance.

Basically what I have is a very lightly hopped Pale Ale. It's not bad, it's certainly very drinkable, but it's also very boring. I won't be making that again.

Saturday, August 4, 2007

Kegerator Fun!


Today I finally had the time to finish my kegerator. I didn't have a ton of room, so I went with a Sanyo 4912 mini fridge, which has room for 2 five gallon cornelius kegs and 1 five pound CO2 tank. I was very surprised at just how easy it was to convert this refrigerator to a kegerator. I purchased 4 kegs from morebeer as well as the miscellaneous tubing and connections that I needed. I purchased the draft tower and two tap handles from Northern Brewer.

I didn't take pictures of the process, but it went pretty simply. I took the plastic top off the fridge and turned it upside down. I used a dremel to remove the plastic fins underneath in an 8" x 8" square. I cut a piece of 1/2" plywood to fit in this space and placed it inside. I placed the cover back on the fridge and then carefully drilled a hole with a 2 3/4" hole saw, being careful to avoid the coolant line that was 7" from the back of the fridge. Once I had a hole all the way through to the inside I marked four holes for the screws to the draft tower. I carefully drilled these holes through the plastic top and the plywood support. I hammered tee nuts into the holes. I then applied a thick bead of silicon caulk to the plywood and affixed it permanently to the plastic top and screwed the tower in.

After that it was just a matter of putting the plastic top back on (and putting some foil tape on the hole I drilled to keep the insulation in). Now I have my very own kegerator. On the left is a pretty decent pale ale; on the right a beer that is pretty crappy for the amber ale it is supposed to be, but as a beer not bad at all.
Posted by Picasa