Saturday, October 20, 2007

California Common

I brewed up a california common back in August. A california common is the proper name for what is also known as steam beer.

Steam beer was a beer originally produced in California around the turn of the century. German immigrants to the bay area setup breweries to supply beer to all the local workers. Germans have a long lagering tradition and would naturally try to apply their lager knowledge to the new beer they were producing on the west coast.

Unfortunately, there were no cool, damp caves as in Germany, nor was there any readily available source of ice to keep the beer cold. So, they did the best they could and produced lager beer at moderate temperatures (60-65°) instead of the cooler temperatures a lager would normally require (40-50°).

The result was steam beer, now known as the California Common.

My California Common turned out well. It took a long time to fully ferment, nearly a month in the primary. It has now been in a keg at cold temps for another month and is quite tasty. It has a nice creamy character and clean finish. The Northern Brewer hops that are the trademark of this style give this beer a slightly odd 'spicy' taste. So it's initially a surprising taste, but it grows on you.



Monday, October 1, 2007

Schwarzbier

Yesterday was not the best brew day I ever had. I was creating a schwarzbier and was pretty excited about it. I started to mill my grains but my Barley Crusher kept binding up. The roller that spins free was completely stuck. I had to take the whole thing apart, clean it and put it back together. That got me through about 5 more pounds before I had to break it down again.

Well, I got through that, got all my grains crushed and was ready to dough in. I added the grains to the water and was thinking to myself that it looked awfully runny. But I figured Beersmith has always figured mash volumes correctly, so I went with it. After starting the mash I went to double check the volumes and realized that Beersmith had indeed calculated them correctly, but I was reading them off the wrong recipe. D'oh!

I decided to just continue on. I figured there was nothing to be done now. I headed out to grab some breakfast while the grains were mashing and realized my car had been broken into. Fantastic! It took me a good hour or more to get that dealt with (calling police, cancelling a credit card that was stolen, etc) and by the time I got back to the beer, it had been mashing for 2 hours. Oops.

Oh well, I drained the mash tun, sparged and soldiered on. Started the boil, turned my back for a second and had my first ever boil over. yay!

I finally got it finished and into the carboy. Ended up overshooting my target OG by 6 points. 1.059 instead of 1.053. Guess that one will be a little stronger than intended.

Still it had a beautiful color and smelled fantastic. I fed it a healthy slurry of German Bock yeast and hopefully will soon have 5 gallons of delicious beer!
Posted by Picasa

I hope you like fruit!

I brewed what should have been a very nice Irish Red a while back. The grain bill looks good, the hopping seemed right, but the one unknown was the yeast. White Labs WLP004 Irish Ale yeast. It's an Irish beer, so Irish Ale yeast should be just the ticket, right? Wrong! This yeast produced a host of fruity flavors in the beer. It completely upsets the balance and makes the beer hard to drink.

I'm disappointed, but I'm not going to give up so easily. I'm going to brew the same recipe again, but substitute either a clean Ale yeast or a clean lager yeast. There is a good beer hiding in this recipe. I'll find it yet.

Friday, September 7, 2007

Mike's Milkshake

My next project is to make a creamy smooth porter. At least that was the plan when I started the recipe. In the end, it should be porter-like, but I've decided to make it a lager. I'll use a german lager yeast to hopefully high-light the malts and keep it easy-drinking.

Here it is - Mike's Milkshake Porter

Real Men Drink Blueberry Beer

I brewed a Wheat Beer last month. The recipe calls for an ounce of blueberry extract to be added. I was a little gun-shy about adding blueberry to my nice beer so I went ahead and kegged it without the extract. It tasted fine without it, a little bland perhaps but OK.

Well, I got curious and decided to add a couple drops of the blueberry extract to a glass and pour the beer on top of it. Much to my surprise it tasted great. Gave it a nice tang that blended with the coriander nicely.

So, now that I'm a true believer in the blueberry I bled the pressure out of the keg and added two capfuls of the extract. I probably could have done more, but decided to err on the side of caution.

Monday, August 27, 2007

Jamil's California Common

Here is the California Common that I brewed yesterday:

Steamed Ant
Brew Type: All Grain
Style: California Common
Brewer: Joshua
Batch Size: 6.00 gal
Boil Volume: 7.35 gal
Boil Time: 60 min
Brewhouse Efficiency: 70.00 %


Ingredients
9.00 lb Pale Malt (2 Row) US (2.0 SRM)
2.00 lb Munich Malt (8.0 SRM)
1.00 lb Caramel/Crystal Malt - 40L (40.0 SRM)
0.50 lb Victory Malt (25.0 SRM)
0.13 lb Chocolate Malt - Light (200.0 SRM)
1.14 oz Northern Brewer [7.30 %] (60 min) Hops 25.3 IBU
0.94 oz Northern Brewer [7.30 %] (15 min) Hops 10.4 IBU
1.00 oz Northern Brewer [7.30 %] (0 min) Hops -
1 Pkgs San Francisco Lager (White Labs #WLP810) Yeast-Lager

Beer Profile
Estimated Original Gravity: 1.053 SG (1.048-1.054 SG)
Measured Original Gravity: 1.052 SG
Estimated Final Gravity: 1.017 SG (1.011-1.014 SG)
Estimated Color: 11.1 SRM (10.0-14.0 SRM)
Bitterness: 35.7 IBU (30.0-45.0 IBU)
Estimated Alcohol by Volume: 4.77 % (4.50-5.50 %)
Mash Profile Name: Batch Sparge
Mash Tun Weight: 9.00 lb
Mash Grain Weight: 12.63 lb
Mash PH: 5.4 PH
Grain Temperature: 72.0 F
Sparge Temperature: 168.0 F
Sparge Water: 5.42 gal
Adjust Temp for Equipment: TRUE
Mash Temp: 154°F

Damn you Beersmith!

Brewed a California Common yesterday, as per usual I just followed the mash steps from Beersmith. This has always worked out well for me after some initial setup to get my equipment volumes and boil-off right.

Well, it seems I found a quirk in Beersmith. I was doing so many 90 many boils that I set my equipment to 90 minute boils (and forgot I had done so). Well, as it turns out, if your equipment is set to 90 minutes, the recipe will give you the water quantity for 90 minutes even if the recipe is set to 60. So I overshot my volume, by a lot. Oops.

On the plus side, I had tightened down my crush for this batch and still got 1.052 when I was expecting 1.053 for a smaller volume. So things should still turn out OK.